Couplings Attachment Type
1.Setscrew Type: Two setscrews have a angle of90?, this low-cost type
features the most conventional attachment. However, the point of setscrew
may cause damage to the shaft and may be difficult to remove.
2.Clamp Type: This type is clamped on the shaft by tightening the socket
head cap screws. Attachment and removal is easy, and no shaft damage results.
3.Keyway Type: This type, like the setscrew type, features the most
conventional attachment and is used for transmitting relatively high torque
Setscrew/Clamp type hubs are applied for preventing shift towards the axial
Direction.
4.Combination Type: This type is combined with setscrew type, clamp type or keyway type.
5.Cone Shaft Type: This type is through cone shaft and keywayconnect.
6.Spline Shaft Type: This type is through spline shaft connect.
<li id="cucog"></li>